The CX Standard –Thru-Wall System has a dynamic air flow allowing for excellent circulation of air throughout the cellar,“best-in-class” 30 degree temperature variance, and the digital controller with system safety management and anti-frost features. Furthermore, these units are a direct replacement for the Breezaire and Wine Mate Thru-Wall units.
$2,159.00
Power Cord:
The BTU/h value shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.) which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature.
Cellar Size: Approx. 300 cu. ft. when cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit) BTU/h w/85°F air entering condenser coil: 1453 Dimensions: 14.25”W x 13.25”H x 16.38”D Refrigerant: R-134a HP: 0.57 Voltage Rating: 115V (20-amp dedicated circuit required); 230V (subject to availability) Weight: 65lbs Amps: 4.5 (running amps) Drain Line: 3/8” Condensate (rear location only) Installation: Through-the-wall, partially ducted Thermostat: Advanced electronic control system Temp. Delta: Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature
Click here for the Product Spec Sheet: Click here
Click here for the CX2200 Owner’s Manual: Click here
Warranty Information:
A limited 2-year parts and labor / 5-year compressor
.jpg)
.jpg)