.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
The WhisperKOOL Platinum Split 8000 is a fully ducted wine cellar cooling system with your choice of 110V ΩMEGA H.E. or 220V Advanced H.E. condenser. Both the evaporator and condenser can be located outside the wine cellar, with conditioned air delivered through properly designed ductwork.
24V Thermostat Conversion Kit (No Bottle Probe / KDT):
WK Condenser:
WK Omega Duct Kit:
WK Omega Exterior Housing (Required Outdoors):
WK Omega Condenser Coil Coating:
The WhisperKOOL Platinum Split 8000 is a fully ducted split wine cellar cooling system designed for installations where quiet operation and a clean, finished wine cellar are priorities.
Unlike ductless systems, the Platinum Split 8000 places both the evaporator and condenser outside the wine cellar. Conditioned air is delivered to the cellar through ductwork, keeping the cooling equipment out of sight and helping create a quiet, unobtrusive wine-storage environment.
The system is available with your choice of a 110V ΩMEGA H.E. Condenser or 220V Advanced H.E. Condenser, allowing the condenser configuration to be selected based on the electrical service, installation environment, and project requirements.
The Platinum Split 8000 is well suited for larger residential and commercial wine cellar applications where the cooling equipment needs to remain outside the cellar while conditioned air is distributed through a properly designed duct system.
The 110V ΩMEGA H.E. condenser provides a flexible option for installations where 110V power is preferred or required. Appropriate installation accessories are available for applicable indoor and outdoor condenser configurations.
The 220V Advanced H.E. Condenser is engineered for high-efficiency, ultra-quiet operation, simplified installation, and reliable performance across a wide range of ambient conditions. Designed for demanding wine cellar applications, it provides enhanced system protection, durability, serviceability, and built-in diagnostic capabilities, with an operating range from −20°F to 120°F.
Is the Platinum Split 8000 the right-sized system for your wine cellar? Proper system sizing depends on the specific heat load and construction of the wine cellar.
Contact Wine Appreciation before ordering if you are unsure which WhisperKOOL system or condenser configuration is appropriate for your project.
A qualified HVAC-R technician is required for installation of the Platinum Split 8000. Failure to have the system installed by a qualified technician will void the warranty.
WhisperKOOL does not provide a smart thermostat.
By selecting the optional 24V Thermostat Conversion Kit, the system will not include the standard WhisperKOOL KDT control or liquid-temperature-measuring bottle probe. A compatible 24V thermostat must be supplied by the customer.
WhisperKOOL does not provide technical support for third-party smart thermostat programming or operation.
California Residents
The Platinum Split 8000 system includes the WhisperKOOL ducted evaporator and your selected condenser configuration. Both the evaporator and condenser are installed outside the wine cellar, with conditioned air delivered to the cellar through ductwork.
Depending on the configuration selected, additional installation components or accessories may be required.
The line set is not included with the system. Line-set requirements and other installation materials should be determined by the qualified HVAC-R professional based on the specific installation.
The BTU/h rating represents the theoretical cooling capacity of the Platinum Split 8000. Actual cooling requirements can vary depending on the specific design, construction, and environmental conditions of the wine cellar.
Factors such as glass, stone, concrete, insulation, ambient temperature, cellar location, lighting, and other heat-producing elements can increase the cooling load beyond the theoretical calculation.
We recommend selecting a cooling system with sufficient capacity to compensate for these variables. An undersized system may run excessively, may not maintain the desired cellar temperature, and can contribute to premature system failure.
For the most accurate system selection, a wine cellar heat-load calculation should be performed before ordering.
If you are unsure which WhisperKOOL system is appropriate for your wine cellar, contact Wine Appreciation before ordering.
Choosing between the 110V ΩMEGA H.E. and 220V Advanced H.E. condenser depends on the available electrical service, condenser location, installation environment, and project requirements.
If you're working on a new wine cellar or replacing an existing cooling system, contact Wine Appreciation before ordering. We can help determine which WhisperKOOL configuration is appropriate for your project.
The 110V ΩMEGA H.E. condenser provides a flexible electrical configuration for installations where 110V power is preferred or required. Appropriate accessories are available for applicable indoor and outdoor installations.
The 220V Advanced H.E. condenser is designed for outdoor installation and demanding environmental conditions. It provides high-efficiency performance, ultra-quiet operation, built-in diagnostics, and enhanced durability and serviceability.
The right condenser configuration depends on your available electrical service, planned condenser location, installation environment, and project requirements. A qualified HVAC-R professional should confirm the appropriate configuration before installation.
110V ΩMEGA H.E. Condenser | 220V Advanced H.E. Condenser |
| Voltage - 110V–120V | Voltage - 220V |
| System - Platinum Split 8000 | System - Platinum Split 8000 |
| Condenser Placement - Indoor or outdoor with the appropriate accessories | Condenser Placement - Outdoor |
| Installation Options - Suitable indoor or outdoor location based on the selected configuration and accessories | Installation Options - Concrete pad, wall-mounted, roof-mounted, or other suitable outdoor location |
| Key Benefits - High-efficiency performance, quiet operation, and flexible installation options. | Key Benefits - High-efficiency performance, ultra-quiet operation, built-in diagnostics, enhanced durability, and serviceability |
| Operating Environment - Designed for reliable operation from −20°F to 120°F |
Specification | Ducted 8000 |
| Evaporator Location | Outside Wine Cellar |
| System Type | Fully Ducted Split Wine Cellar Cooling System |
| Condenser Options | 110V ΩMEGA H.E. / 220V Advanced H.E. |
| Air Distribution | Conditioned Air Delivered Through Ductwork |
| BTU/h Rating | 3,073–4,798 BTU/h |
| Temperature Differential | Up to 55°F under specified operating conditions |
| Controller | WhisperKOOL KDT Digital Controller |
| Temperature Sensor | Liquid-Temperature-Measuring Bottle Probe |
| Installation | Professional HVAC-R Installation Required |
| Line Set | Not Included |
Ducted Evaporator: Approximately 22.1"L × 22.5"W × 15.5"H
Condenser: Approximately 31.18"L × 10.75"W × 21.18"H
Reference Cellar Size: Approximately 1,750 cu. ft. when fully insulated and sealed with a proper vapor barrier*
Both the evaporator and condenser are installed outside the wine cellar. Conditioned air is delivered to the cellar through a properly designed duct system.
Physical dimensions, electrical requirements, refrigerant specifications, line-set requirements, and installation clearances should be confirmed against the current WhisperKOOL documentation for the specific condenser configuration being ordered.
*Each cellar is unique and has specific cooling requirements. A heat-load calculation should be performed before selecting a cooling system.
The 110V ΩMEGA H.E. Condenser provides a flexible electrical configuration for installations where 110V power is preferred or required.
The ΩMEGA condenser can be configured for applicable indoor or outdoor installations using the required accessories.
Depending on the installation, available accessories may include:
Select the appropriate condenser and accessories based on the planned installation environment, available electrical service, and project requirements.
The 220V Advanced H.E. Condenser is designed for high-efficiency performance, ultra-quiet operation, simplified installation, and reliable operation across a wide range of ambient conditions.
Designed for demanding wine cellar applications, the Advanced H.E. provides enhanced durability and serviceability along with built-in diagnostic capabilities.
The Platinum Split 8000 can be ordered with an optional 24V Thermostat Conversion Kit.
Selecting the 24V conversion changes the standard control configuration. The standard WhisperKOOL KDT control and liquid-temperature-measuring bottle probe are not included with this configuration.
A compatible 24V thermostat must be supplied by the customer.
Important: Compatibility with third-party thermostats should be confirmed before ordering. WhisperKOOL does not provide technical support for third-party smart thermostat programming or operation.
The WhisperKOOL Platinum Split 8000 Ducted is designed for wine cellar applications where the cooling equipment is located outside the wine cellar and conditioned air is delivered through ductwork. Actual cooling requirements depend on the specific heat load of the cellar.
Factors that can affect cooling requirements include:
For the best results, perform a heat-load calculation before selecting a cooling system. Proper sizing is essential for maintaining the desired wine cellar temperature and a suitable wine-storage environment.
If you are unsure which WhisperKOOL system is appropriate for your cellar, contact Wine Appreciation before ordering.
The Platinum Split 8000 Ducted is designed for professional installation.
Both the evaporator and condenser are installed outside the wine cellar, with conditioned air delivered to the cellar through properly designed ductwork.
A qualified HVAC-R professional should perform the installation, including refrigerant connections, evacuation, charging, electrical connections, condensate management, ductwork, and system commissioning.
The Advanced H.E. condenser is designed for outdoor installation, including suitable:
Note: A qualified HVAC-R professional should confirm the final installation configuration and requirements before installation.
For the most current owner manuals, installation documentation, product specifications, warranty information, and warranty requirements, please contact WhisperKOOL directly. Manufacturer documentation and warranty requirements may be updated as products and configurations change. Wine Appreciation recommends confirming the applicable documentation and warranty requirements with WhisperKOOL before installation.
.jpg)
