Breezaire WKSL 2200 Split Wall Mount Cooling Unit


The BREEZAIRE WKSL Series cooling systems is a special split system that allows for mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. These systems are designed – when installed in a properly constructed enclosure – to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity.  FREE SHIPPING!

  • Split system design provides flexibility needed to create an ideal installation or deal with unusual site problems
  • Allows mounting of the cooling (evaporator) module in the enclosure to be cooled
  • Allows the exhaust (condenser) module to be as far as 50 feet away
  • Accurate, easy to adjust temperature set points with continuous LED cabinet temperature display
  • Blocked airflow protection shuts down unit and protects wine in case of high temperatures caused by blockage or fan failure
SKU: WKSL2200 Category:

Product Options and Upgrades

The WKSL Series wine cellar cooling system is a simple split system design that is extremely easy to install by a qualified air conditioning or refrigeration service technician. A mechanical line set – basically two copper tubes – connect the two modules. Both units are hard wired – 110 AC volt electrical source. These cooling units arrive uncharged and must be charged with refrigerant during the installation process.  FREE SHIPPING!

The Cold Air UP inside the cellar is an available option when the Evaporator within the cellar needs to be positioned lower down, closer to the floor. To make this modification, you simply need re-position a cover plate on site to allow for the cold air to be directed upwards.

IMPORTANT INSTALLATION INFORMATION – The WKSL4000 can now have a maximum of 50ft of line set (previously the earlier versions of the WKS4000 allowed for 100ft).
The WKSL2200 & WKSL4000 are available in 230V/ 50Hz/ 2Phase, please inquire about the WKSL2150 & WKSL3350.

The L series now allows for digital display on your split system.
  • Large, easy to read, cool green LED display
  • Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.
  • Power outage protection.
  • Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure.
  • Controls temperature by enclosure (cellar) air sensors or optional bottle probe.


HUMIDITY & INSTALLATION: By the nature of their operation, wine cooling units will maintain a stable humidity level, lower than the relative ambient humidity. In situations where the ambient humidity is high, the cooling unit will lower the humidity to desirable storage levels. In situations where the ambient relative humidity is very low, the desired enclosure relative humidity may not be achieved without adding moisture. To add moisture to the enclosure only use slow, natural evaporation from a small porous water container. Do not use a humidifier.

TEMPERATURE & INSTALLATION: These wine cellar cooling units are designed to cool 25 degrees less than the ambient temperature of the venting side of the unit. In some cases, improper placement or installation may cause the unit’s performance to be degraded. The condensing unit must have a constant supply of fresh air, less than 85 degrees F. If the condensing unit is located in a confined area with poor ventilation, the unit will not be able to reject the heat it is removing from the enclosure and a malfunctioning unit will be suspected, even though the unit is mechanically sound. Call us to discuss your installation concerns.

Adjustable Temperature The ideal temperature for storing and aging wine is between 50 and 60 degrees Fahrenheit. Each BREEZAIRE system includes an adjustable thermostat that makes it possible for the user to precisely control the conditions in the wine cellar. When initially bringing the temperature down to the desired level and in maintaining the target temperature, the system produces a gentle stream of cool air – never a blast of cold air that could subject the wine to abrupt temperature changes.

Automatic Humidity Control Humidity must be present in the wine cellar to prevent cork and label deterioration. The gentle cooling action of the BREEZAIRE system maintains the relative humidity in the 50 to 75 percent range, eliminating excess moisture but never allowing the air to become dry enough to create an undesirable condition. (Additional moisture may be required in extreme dry climates.

Vibration-Free Operation All BREEZAIRE systems are engineered to be vibration free, hand assembled, and tested to ensure that they meet the most exacting standards. The elimination of vibration levels that may be undetectable to the owner results in wines that have greater clarity and brilliance.

Ultra Quiet Operation BREEZAIRE systems perform their task quietly and unobtrusively to preserve the atmosphere of isolation from the outside world that makes a visit to a wine cellar an unique experience.

Attractive Metal Cabinet An attractive metal cabinet that blends in with the d1/2©cor of your cellar area and can be flush mounted to any wall.

Ease of Installation BREEZAIRE’s most popular systems are completely self-contained modules that are simply mounted in a wall and connected to a standard 115AC source. No plumbing, complicated wiring or special procedures including the on-site installation of refrigerant are required.

Uncompromising Quality All BREEZAIRE systems are designed to deliver superior performance. Constructed using only the highest quality components, and hand assembly by skilled craftsmen in our U.S. production facilities.

Comprehensive Warranty Coverage
Owners enjoy the security of warranty coverage that reflects BREEZAIRE’s high standards.

Full Factory Support
Support in the form of expertise in system selection, enclosure design, and problem solving in the highly specialized area of creating and maintaining an ideal environment for delicate products.

BTU/h Rating


The BTU/h value shown here is a theoretical number.


Cabinet/Enclosure Size:Approx. 265 cu. ft. *not rated
Condenser Dimensions:14.25”W x 14.125”H x 11.00”D
Evaporator Dimensions:14.25”W x 14.125”H x 7.750”D
Voltage Rating:110 V / 60 Hz
Weight:25lbs (Evaporator) 35lbs (Condenser)
Amps:1 Amp (Evaporator) 6 Amps (Condenser)
Temp. Delta:Can maintain a 55°F cellar temperature
Humidity Control:Automatic

Instructions / Warranty Information

Click here for Installation Instructions: Click here

Warranty Information:  Click here
1-year  labor / 5-year parts

For Controller Owners Manual:  Click here


There are no reviews yet.

Be the first to review “Breezaire WKSL 2200 Split Wall Mount Cooling Unit”