WhisperKOOL Ductless Split – Twin Ceiling Mount 9000 with Copeland 220V Condenser
- Offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment
- Virtually invisible inside the cellar
- Flare fittings for easy installation
- Duramax coils
- Standard and 24V thermostat options available
- Hex mesh grille with air filter
- KDT Digital Controller/Thermostat with 50-ft. cable
- 220V High Efficiency (H.E.) Condenser Option
The Twin Ceiling Mount 9000 split system comes with dual evaporators for larger capacities. Keep your wine at the center of attention and your cooling unit out of sight.
Technicians and installers will be happy to hear that the electrical wiring, bottle probe wiring, and the line set are all located at the bottom of the unit, rather than the top. Not only are the essential components relocated and easier to access, flare fittings will now be utilized so that there is no brazing needed in the field. The redesign includes e-coated duramax evaporator coils which will improve system performance, a 2-speed fan switch that will decrease noise levels up to 7 dbs, and a new looking hex mesh grille with an air filter to protect the unit from the intake of potentially harmful debris during the initial start-up.
Note: A qualified HVAC-R technician is required for installation. Failure to have the system installed by a qualified technician will void the warranty. *PLEASE NOTE: WhisperKOOL does not provide smart thermostat. By selecting the 24V Thermostat Conversion Kit, you have acknowledged that the system will not be built with the standard WhisperKOOL control or liquid measuring bottle probe. You will have to source and purchase your own 24V smart thermostat to run the equipment. The WhisperKOOL Customer Satisfaction Team does not provide technical support for smart thermostats.
||Approx. 3000 cu. ft. when cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit)
|BTU/h w/85°F air entering condenser coil:
||Evaporators: 35.75”L x 14.5”W x 12.75”H, condenser: 16.08”L x 16.23”W x 12.61"H
||Evaporator: 115V (15-amp dedicated circuit required), condenser: 230V (15-amp dedicated circuit required)
||Evaporator: 80 lbs (per unit), condenser: 67 lbs
||Evaporator: 1 running amp (per unit), compressor: LRA 43, RLA 8
||Liquid line 3/8"; suction line 3/4" (less than 50-ft.), 7/8" (greater than 50-ft.)
||1/4" ID clear plastic tubing
||Evaporator units are installed in the cellar (through the ceiling). Condensing unit can be installed up to 100 line feet from evaporator unit.
||Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
||Can maintain a 55°F cellar temperature with up to 110°F condenser air intake temperature
Click here for the Product Spec Sheet: Click here
Manuals / Warranty Information
Click here for the Ductless Ceiling Mount Twin Owner’s Manual: Click here
Click here for the Ductless Ceiling Mount Twin Owner’s Manual Addendum: Click here
Click here for the Ductless Ceiling Mount Twin with 24 Volt Option Owner’s Manual: Click here
Click here for the Warranty Information: Click here
PLEASE NOTE: In order to activate the warranty for split system units (Platinum Split Series, Ceiling Mount Series, and Quantum Series), a Product Warranty Checklist must be submitted and approved by WhisperKOOL. This checklist can be printed out, completed, and emailed to email@example.com.